Table of Contents
Advertisement
Function
[CLOSE]
network connection status
image database size
system status
[MESSAGE LOG]
[QAP]
[iLinq]
Definium 5000 X-Ray System
Operator Manual
Closes the Image Viewer screen and prompts you to save any
changes to images.
Close also initiates auto print and auto push, if enabled.
Refer to
Save Changes to Images
Appears when the Definium 5000 is connected to the hospital
network.
Shows how many images are currently saved to the local
database and approximately how many more images the
database can accommodate.
Displays the last system status message.
NOTE: To clear the system status area, open the Message Log
and close it again.
Refer to
Chapter 4: General Information-System Status and
Messages
(p. 4-7) for more information.
Brings up the message log since the last system re-start.
Refer to
Chapter 4: General Information-System Status and
Messages
(p. 4-7) for more information.
When the yellow alert icon is present, indicates that QAP should
be performed to ensure continued image quality.
NOTE: QAP cannot be performed when the Image Acquisition or
Image Viewer screens are displayed. End the exam or
close the images before attempting to perform QAP.
Refer to
Chapter 11: Quality Assurance Process and
Maintenance
for more information.
Connects to iLinq remote support services.
Refer to
Chapter 4: General Information-iLinq
information.
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 8: Image Viewer
Description
(p. 8-27) for more information.
(p. 4-9) for more
8-4
Advertisement
Table of Contents
