Add Or Edit Dicom Printers - GE Definium 5000 Operator's Manual

Add or Edit DICOM Printers

Adding and editing printers use very similar process and the same screens shown in Figure 10-6,
Figure 10-7, and Figure 10-8. Table 10-3, Table 10-4, and Table 10-5 describe the fields in detail.
1. If Editing an existing printer's configuration, select the printer from the DICOM Printers list and press
[EDIT].
If adding a new printer, press [ADD].
2. Complete requested information for all tabs (see Table 10-3, Table 10-4, and Table 10-5) and press
[SAVE] to add the printer or save the changes.
Figure 10-6 Add Printer screen – Printer Tab
Table 10-3 Add Printer screen– Printer Tab description
Function
DICOM Printer Label
Application Entry
Title
Network Address
Definium 5000 X-Ray System
Operator Manual
The name of the printer that appears in the DICOM Printers list and on the
print setup screens.
NOTE: DICOM printer labels cannot have spaces in the name. Use underscores
( _ ) to separate words.
The DICOM application title.
The IP address of the printer.
5197809-1EN
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
Description
Rev. 4 (13 February 2008)
10-8