GE Definium 5000 Operator's Manual page 65

4. Click [SEND TO GE].
5. Click [CLOSE].
iLinq closes and returns you to the Worklist or Acquisition screens.
Installation and use of the iLinq system is limited to GE Customers with an X-ray system that is under
warranty or covered by a valid GE Service Contract, in accordance with the terms and conditions of the
iLinq Agreement or GE Service Contract. The presence of the GE iLinq system alone, at a your site, does
not provide you any rights or title to the iLinq system or any license or right to access, use or decompile
the iLinq system. Any access to or use of the iLinq system beyond the conditions specified in the iLinq
Agreement or GE Service Contract; or any decompilation of the iLinq system by anyone other than GE
personnel is prohibited. By signing the iLinq Agreement, you agree to use reasonable effort to protect the
iLinq system against damage or loss and to prevent access to, use of or decompilation of the iLinq
system by unauthorized personnel.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 4: General Information
4-11