Edit Patient Information - GE Definium 5000 Operator's Manual

Edit Patient Information

Patient information can only be edited before any procedure has been opened.
NOTE: You may only edit patient information for one procedure at a time. If multiple procedures are
selected, the [PATIENT INFORMATION] button is disabled.
1. Select the procedure from the Worklist.
2. Press [PATIENT INFORMATION].
The Patient Information screen appears.
3. Edit the information as necessary.
4. Press [SAVE] to record the changes and return to the Worklist.
Pressing [CANCEL] closes the Patient Information screen without saving changes.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 5: Worklist
5-19