Table of Contents
Advertisement
Function
Patient Position:
network connection status
Heat Units Remaining
system status
[MESSAGE LOG]
Definium 5000 X-Ray System
Operator Manual
Selects the patient position relative to the detector. The available
options change if the currently selected protocol view is for paired
or non-paired anatomy.
For paired anatomy, the available options are:
• Digits to Head
• Digits to Feet
• Digits to Front
• Digits to Back
For unpaired anatomy, the available options are:
• Head Up
• Head Down
NOTE: The above lists of positions for paired and unpaired anatomy
are a general guidelines only. Some views have different
options.
Appears when the Definium 5000 is connected to the hospital
network.
Shows the percentage of heat units remaining.
Refer to
Chapter 4: General Information-X-ray Tube Heat Units
Remaining
(p. 4-8) for more information.
Displays the last system status message.
NOTE: To clear the system status area, open the Message Log and
close it again.
Refer to
Chapter 4: General Information-System Status and
Messages
(p. 4-7) for more information.
Brings up the message log since the last system re-start.
Refer to
Chapter 4: General Information-System Status and
Messages
(p. 4-7) for more information.
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 6: Image Acquisition
Description
6-7
Advertisement
Table of Contents
