Safety Notices - GE Definium 5000 Operator's Manual

Safety Notices

The following safety notices are used to emphasize certain safety instructions. This guide uses the
international symbol along with the danger, warning, or caution message. This section also describes the
purpose of a Note.
DANGER: Danger is used to identify conditions or actions for which a specific hazard is known to
exist which will cause severe personal injury, death, or substantial property damage if the
instructions are ignored.
WARNING: Warning is used to identify conditions or actions for which a specific hazard is known to
exist which may cause severe personal injury, death, or substantial property damage if
the instructions are ignored.
CAUTION: Caution is used to identify conditions or actions for which a potential hazard may exist
which will or can cause minor personal injury or property damage if the instructions are
ignored.
IMPORTANT!: An Important notice provides information that does not concern the safety of people or
equipment but may effect the internal procedures of your facility or image quality.
NOTE: A Note provides additional information that is helpful to you. It may emphasize certain information
regarding special tools or techniques, items to check before proceeding, or factors to consider
about a concept or task.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 1: About This Guide
1-3