GE Definium 5000 Operator's Manual page 102

1. Press [DISCONTINUE] from the bottom of the Acquisition screen.
A message appears: "Please select a reason for discontinuing this exam."
2. Select the option that best describes why the exam is being discontinued.
Choose "Discontinue for unspecified reason" if no other options describe the current situation.
3. Press [OK].
The message closes and the Worklist screen opens.
The status of the procedure changes to "Discontinued" on the Worklist.
If multiple procedures were selected, the discontinued status applies to all procedures that were
open when the exam was discontinued.
Press [CANCEL] to close the message and return to the Acquisition screen.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 6: Image Acquisition
6-18