Table of Contents
Advertisement
3. Press [ADD VIEW] or [EDIT VIEW].
The Add View (or Edit View) screen (1 of 2) appears.
4. Type a View Name. Do not use spaces. Use underscores ( _ ) to separate words.
5. From the Position View After drop-down list, select the placement of the view within the exam.
6. Select the Acquisition Type.
Available options are:
– Standard
– Bone
– Soft Tissue
7. Check if horizontal flip is to be applied when displaying the image.
8. Select the Anatomy.
NOTE: The selected anatomy will determine the image processing for the view. Be sure to select the
appropriate anatomy for the body part imaged.
9. Select the most appropriate View (AP, Lat, etc.).
The selected anatomy determines which views are available.
Definium 5000 X-Ray System
Operator Manual
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 10: Set Preferences
10-46
Advertisement
Table of Contents
