Table of Contents
Advertisement
Follow this process to change the settings of a pre-programmed position.
1. On the Programs screen, press and hold the [PROGRAMS] button for 5 seconds.
Figure 3-12 Touch Screen Console – Programs button
A virtual keyboard screen appears (Figure 3-13).
Figure 3-13 Touch Screen Console – Password screen
2. Insert the password (1111).
3. Press [OK].
4. Select the Program position number to be modified and Press [MODIFY].
Figure 3-14 Programs modifying
5. Move the Arm to the desired position.
Definium 5000 X-Ray System
Operator Manual
1. Reference picture of the selected position
2. Position number
3. Access to modifying the programmed position
4. Programmed position data
5. Save positioning data
6. Exit from modifying position
5197809-1EN
Rev. 4 (13 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter 3: System Overview
3-14
Advertisement
Table of Contents
