•
"Powering On a DC-Powered SRX5400 Firewall" on page 202
10. Perform the initial system configuration as described in
on page
206.
Unpacking the SRX5400
IN THIS SECTION
Tools and Parts Required to Unpack the SRX5400 Firewall | 167
Unpacking the SRX5400 Firewall | 167
Verifying the SRX5400 Firewall Parts Received | 169
Tools and Parts Required to Unpack the SRX5400 Firewall
To unpack the firewall and prepare for installation, you need the following tools:
• Phillips (+) screwdriver, number 2
• 1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
• Blank panels to cover any slots not occupied by a component
Unpacking the SRX5400 Firewall
The firewall is shipped in a wooden crate. A wooden pallet forms the base of the crate. The device
chassis is bolted to this pallet. A Getting Started Guide and a cardboard accessory box are also included
in the shipping crate.
The shipping container measures 33.5 in. (85.1 cm) high, 28 in. (71.1 cm) wide, and 26 in. (66.0 cm)
deep. The total weight of the container containing the device and accessories can range from 153 lb
(70 kg) to 351 lb (159.2 kg).
"Initially Configuring the SRX5400 Firewall"
167