Srx5400 Firewall Grounding-Cable Specification - Juniper SRX5400 Hardware Manual

Figure 15: SRX5400 Firewall Grounding Point
To ground the firewall, you must connect a grounding cable to earth ground and then attach it to the
chassis grounding point using the two screws provided.
NOTE: Additional grounding is provided to an AC-powered firewall when you plug its power
supplies into grounded AC power receptacles.

SRX5400 Firewall Grounding-Cable Specification

The grounding cable that you provide must meet the specifications in
Table 21: Grounding Cable Specifications
Cable Type Quantity and Specification
Grounding
One 6-AWG (13.3 mm
2
), minimum 60°C wire, or as required by the local code
Table 21 on page 37.
37