Reinstalling The Fan Tray After Installing The Srx5400 Firewall Without A Lift - Juniper SRX5400 Hardware Manual

Hide thumbs Also See for SRX5400:

Table of Contents

Figure 79: Reinstalling a Power Supply

Reinstalling the Fan Tray After Installing the SRX5400 Firewall Without a Lift

To reinstall the fan tray (see

1. Attach an ESD grounding strap to your bare wrist, and connect the other end of the strap to an ESD

grounding point.

2. Grasp the fan tray on each side and insert it straight into the chassis. Note the correct orientation by

the "this side up" label on the top surface of the fan tray.

3. Tighten the captive screws on the fan tray faceplate to secure it in the chassis.

Srx5600 Srx5800