Mic With 2X40Ge Qsfp+ Interfaces (Srx-Mic-2X40G-Qsfp) - Juniper SRX5400 Hardware Manual

Firewall
Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

LEDs
OK/FAIL LED, one bicolor:
LINK LED, single color:
Serial number
The serial number label is yellow and located as shown in
location
Figure 51: SRX-MIC-1X100G-CFP Serial Number Label

MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP)

You use MICs and MPCs to add different combinations of Ethernet interfaces to your firewall to suit the
specific needs of your network. The SRX-MIC-2X40G-QSFP (see
installed in an MPC to add two 40-Gigabit quad small form-factor pluggable (QSFP+) Ethernet ports.
Green–The MIC is operating normally.
Red–The MIC has failed and is not operating normally.
Off–The MIC is powered down.
Green–The link is active.
Off–No link.
Figure 51 on page
Figure 52 on page
117) can be
116
116.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx5600Srx5800

Table of Contents