Installing The Srx5400 Mounting Hardware; Tools And Parts Required To Install The Srx5400 Firewall Mounting Hardware For A Rack Or Cabinet; Installing The Srx5400 Firewall Mounting Hardware For A Rack Or Cabinet - Juniper SRX5400 Hardware Manual

Table 48: Accessory Box Parts List
Part
ESD wrist strap with cable

Installing the SRX5400 Mounting Hardware

IN THIS SECTION

Tools and Parts Required to Install the SRX5400 Firewall Mounting Hardware for a Rack or Cabinet | 172

Installing the SRX5400 Firewall Mounting Hardware for a Rack or Cabinet | 172

Moving the Mounting Brackets for Center-Mounting the SRX5400 Firewall | 175
Tools and Parts Required to Install the SRX5400 Firewall Mounting
Hardware for a Rack or Cabinet
To install the firewall in a rack or cabinet, you need the following tools:
• Phillips (+) screwdriver, number 2
Installing the SRX5400 Firewall Mounting Hardware for a Rack or
Cabinet
The firewall can be installed in a four-post rack or cabinet or an open-frame rack. Install the mounting
hardware on the rack before installing the firewall.
Install the mounting shelf, which is included in the shipping container, before installing the firewall. We
recommend that you install the mounting shelf because the weight of a fully loaded chassis can be up to
220 lb (100 kg).
(Continued)
172
Quantity
1