Connecting Network Cables To Srx5400 Firewall Mics - Juniper SRX5400 Hardware Manual

Hide thumbs Also See for SRX5400:

Table of Contents

Figure 87: Connecting an External Alarm-Reporting Device

4. Attach the other end of the wires to the external device.

To attach a reporting device for the other kind of alarm, repeat the procedure.

Connecting Network Cables to SRX5400 Firewall MICs

To connect the MICs to the network:

1. Have ready a length of the type of cable used by the component.

2. Remove the rubber safety plug from the cable connector port.

LASER WARNING: Do not look directly into a fiber-optic transceiver or into the ends

of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected to a

transceiver emit laser light that can damage your eyes.

Srx5600 Srx5800