Flex I/O Card Port Module Srx-Ioc-4Xge-Xfp Specifications - Juniper SRX5400 Hardware Manual

Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your firewall to suit
the specific needs of your network. The SRX-IOC-4XGE-XFP port module
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Figure 68: Flex IOC Port Module SRX-IOC-4XGE-XFP
Description
•
•
•
•
Software release
•
Cables and 4 XFP Ethernet ports
connectors
Supported XFP transceivers:
10GBASE-ER (model numbers SRX-XFP-10GE-ER and SRX-XFP-10GE-ER-ET )
10GBASE-LR (model numbers SRX-XFP-10GE-LR and SRX-XFP-10GE-LR-ET
10GBASE-SR (model numbers SRX-XFP-10GE-SR and SRX-XFP-10GE-SR-ET )
Controls ONLINE Button–The ONLINE button on the port module front panel toggles the port
module online and offline
Port module with four 10-Gigabit Ethernet XFP ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 4:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
(Figure 68 on page 139)
139