Switch Control Board Srx5K-Scb3 Overview - Juniper SRX5400 Hardware Manual

Table 22: SRX5K-SCBE LEDs
Label Color
FABRIC Green
ACTIVE
FABRIC Green
ONLY
None
OK/FAIL Green
Red
None

Switch Control Board SRX5K-SCB3 Overview

The SRX5K-SCB3 (SCB3) caters to high-end security markets requiring support for higher capacity
traffic, greater interface density (slot and capacity scale), and improved services. The SCB3 is supported
on SRX5400, SRX5600, and SRX5800 Firewalls.
The SCB3 supports the standard midplane and the enhanced midplane.
Some key attributes of the SCB3 are:
• With the existing midplane and fabric link speed of 8.36 Gbps, supports a bandwidth of 205 Gbps
per slot with redundant fabric support and 308 Gbps per slot without redundancy.
• With the enhanced midplane and fabric link speed of 10.2 Gbps, supports a bandwidth of 249 Gbps
per slot with redundant fabric support and 374 Gbps per slot without redundancy with the enhanced
midplane
• Improved fabric performance with the next-generation fabric (XF2) chip.
• Full performance with fabric redundancy for higher-capacity line cards.
State
On steadily
On steadily
Off
On steadily
On steadily
Off
Description
Fabric is in active mode.
SRX5K-SCBE operates in
fabric-only mode.
SRX5K-SCBE operates in
fabric/control board mode.
SRX5K-SCBE is online.
SRX5K-SCBE has failed.
SRX5K-SCBE is offline.
49