Flex I/O Card (Srx5K-Fpc-Ioc) Specifications - Juniper SRX5400 Hardware Manual

Serial Number Location

Flex I/O Card (SRX5K-FPC-IOC) Specifications

The SRX5K-FPC-IOC Flex I/O card (Flex IOC)
accept port modules that add Ethernet ports to your firewall. A Flex IOC with installed port modules
functions in the same way as a regular IOC, but allows greater flexibility in adding different types of
Ethernet ports to your firewall.
Each Flex IOC has a processor subsystem, which includes a 1.2-GHz CPU, a system controller, 1 GB
SDRAM, and two Packet Forwarding Engines with a maximum throughput of 10 Gbps each.
You must install at least one IOC in the firewall. The IOC can be of any of the available IOC or Flex IOC
types.
You can install Flex IOCs in any of the slots that are not reserved for Switch Control Boards (SCBs). If a
slot is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling
air to circulate properly through the firewall.
The serial number label is located as shown in
61 on page 132.
Figure 61: SRX5K-IOC4-MRAT Serial Number
Label
(Figure 62 on page 133) is an IOC with two slots that
132
Figure