Flex I/O Card Port Module Srx-Ioc-16Ge-Sfp Specifications - Juniper SRX5400 Hardware Manual

Weight
LEDs
Serial Number Location

Flex I/O Card Port Module SRX-IOC-16GE-SFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your firewall to suit
the specific needs of your network. The SRX-IOC-16GE-SFP port module
installs into a Flex IOC to add sixteen 10/100/1000 Ethernet SFP ports.
Approximately 10 lb (4.5 kg)
OK/FAIL LED, one bicolor:
•
Steady green–The Flex IOC is operating normally.
•
Red–The Flex IOC has failed and is not operating normally.
•
Off–The Flex IOC is powered down.
The serial number label is located as shown in
Figure 63: Serial Number Label (IOC Shown, Other Cards Similar)
Figure 63 on page 134.
(Figure 64 on page
134
135)