Connector Pinouts For The Srx5400 Firewall Routing Engine Auxiliary And Console Ports - Juniper SRX5400 Hardware Manual

Firewall
Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

Table 45: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port
Pin
Signal
8
Termination network
RJ-45 Connector Pinouts for the SRX5400 Firewall Routing Engine
Auxiliary and Console Ports
The ports on the Routing Engine labeled AUX and CONSOLE are asynchronous serial interfaces that
accept an RJ-45 connector. The ports connect the Routing Engine to an auxiliary or console
management device.
Table 46 on page 163
Table 46: RJ-45 Connector Pinout for the AUX and CONSOLE Ports
Pin
Signal
1
RTS
2
DTR
3
TXD
4
Ground
5
Ground
6
RXD
7
DSR/DCD
8
CTS
describes the RJ-45 connector pinout.
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
(Continued)
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx5600Srx5800

Table of Contents