Srx5400 Firewall Craft Interface Alarm Relay Contacts - Juniper SRX5400 Hardware Manual

Confirm that the MPC in the chassis is online:
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Slot State
0 Online
1 Online
2 Online

SRX5400 Firewall Craft Interface Alarm Relay Contacts

The craft interface has two alarm relay contacts for connecting the device to external alarm devices (see
Figure 5 on page 18). Whenever a system condition triggers either the major or minor alarm on the
craft interface, the alarm relay contacts are also activated. The alarm relay contacts are located on the
upper right of the craft interface.
Figure 5: Alarm Relay Contacts
The alarm relay contacts consist of two sets of connectors, one set for each of the two alarms (major
and minor). For each alarm color there are three connectors.
functions of the connectors.
Temp CPU Utilization (%)
(C) Total Interrupt
37 6 0
44 11 0
49 22 0
Memory Utilization (%)
DRAM (MB) Heap Buffer
2048 19 14
1024 23 29
1024 14 25
Table 9 on page 19 describes the
18