Standard Original Placement Orientations - Sharp MX-2300N User Manual

Standard original placement orientations

Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are
oriented as shown below. If originals are placed in the wrong orientation, staples will be incorrectly positioned and some
special features may not give the expected result. For more information on placing the original, see "3. ORIGINAL" in
the User's Guide.
[Example 1]
[Example 2]
Automatic copy image rotation (Rotation Copy)
If the orientation of the original and paper are different, the original image will be automatically rotated 90º to match the
paper. (When an image is rotated, a message will be displayed.)
[Example]
Orientation of placed original
The original seen
from behind
This function operates in either auto paper selection mode or auto image mode. Rotation can be disabled using
"Rotation Copy Setting" in the system settings (administrator).
Document feeder tray
abc
Document feeder tray
Orientation of paper
Document glass
Place the original
with the corners
aligned here.
c
Document glass
Place the original
with the corners
aligned here.
The image is rotated 90 degrees
34
b a
The paper seen
from behind