Sharp MX-2300N User Manual page 163

MAC OS X (v10.2.8)
11
Select [Applications] from the [Go]
menu.
12
Double-click the [Utilities] folder.
13
Double-click the [Print Center] icon (
If this is the first time you are configuring the printer
driver on your computer, a message to confirm the
addition of a printer will appear. Click the [Add] button.
14
Click [Add].
34
15
Configure the printer driver.
(1) Select [AppleTalk].
)
If multiple AppleTalk zones are displayed, select the
zone that includes the printer from the menu.
(2) Click the machine's model name.
The machine's model name usually appears as
[SCxxxxxx]. ("xxxxxx" is a sequence of characters
that varies depending on your model.)
(3) Select [Sharp].
(4) Click the PPD file for your model.
(5) Click the [Add] button.
• [IP Printing] can be selected in (1) to print to the
machine over a network using the IPP function.
When the machine is in a remote location, this
function can be used in place of the fax function to
print a higher quality image than a fax. If you wish to
use the IPP function, follow these steps to configure
the printer driver.
(1) Enter the address of the machine (IP address or
domain name) in "Printer's Address".
(2) Select [Sharp] in "Printer Model" and click the
PPD file of your model.
(3) Click the [Add] button.
• The PPD file is installed in the following folders on
the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj]
(1)
(2)
(3)
(4)
(5)