Changing The Color Mode - Sharp MX-2300N User Manual

CHANGING THE COLOR MODE

This procedure is used to change the color mode used to scan the original when the [COLOR START] key (
the [BLACK & WHITE START] key (
Start key
[COLOR START] key
[BLACK & WHITE
START] key
Scan
Mode Switch
Exposure
Image
Settings
200X200dpi
Resolution
Send Settings
1
Auto 8 x11
Original
(1)
Scan
Color Mode
Color Mode
B/W Mode
(1)
2
• System Settings (Administrator): Default Color Mode Settings
The default color mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode.
) is pressed.
Mode
Auto
Full Color
Mono2
Grayscale
Auto Mono2/Auto
Color Mode
PDF/PDF
File Format
1 / 2
Special Modes
(2)
Color B/W
Auto Mono2
Full Color
Grayscale
Mono2 Grayscale
(2)
The machine detects whether the original is color or black and white and
automatically selects full color or black and white (Mono 2 or Grayscale)
scanning.
The original is scanned in full color. This mode is best for full color originals
such as catalogues.
Colors in the original are scanned as black or white. This mode is best for
text-only originals.
The colors in the original are scanned in black and white as shades of gray
(grayscale).
Display the color mode screen.
Address Book
(1) Touch the [Image Settings] key.
Address Entry
Special Modes
(2) Touch the [Color Mode] key.
File
Quick File
Select the color mode.
OK
(1) Touch the key of the mode to be used when
the [COLOR START] key (
pressed.
You can select whether black & white scanning will take
place in Mono 2 or grayscale when [Auto] is selected and
(3)
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
grayscale.
(2) Touch the key of the mode to be used when
the [BLACK & WHITE START] key (
pressed.
(3) Touch the [OK] key.
39
Scanning method
) or
) is
) is