Sharp MX-2300N User Manual page 729

Move
Select the location to move the selected item.
6
If you wish to swap the position of the selected print item with the position of another print item, temporarily move
either one of the print items to an unoccupied position and then switch the print positions.
Move
Select the location to move the selected item.
7
Layout
1
AAA AAA
1 2 3
8
4
4 5 6
Stamp
Date Stamp
9
Page
Text
Numbering
OK
OK
OK
2 3
CONFIDENTIAL DO NOT COPY
5 6
1,2,3..
Layout Cancel OK
1/2
Touch the key of the desired destination
position.
The touched position key is highlighted and the print position
changes.
The keys that show the print positions will appear as follows
depending on the state of the settings.
The above key is the top left key. The appearance of the keys
varies by position.
Touch the [OK] key.
If you attempt to move the print item to a position that is already
occupied by another print item, a message will appear asking
you if you wish to overwrite the other print item. To overwrite
the other print item, touch the [Yes] key. To cancel the move,
touch the [No] key.
An item has been already selected to
this location. Overwrite the item?
Touch the [OK] key.
Touch the [OK] key.
123
Not selected, stamp setting has not
been selected.
Selected during selection of the stamp
setting.
Not available, stamp setting has already
been selected.
No Yes