Sharp MX-2300N User Manual page 682

Special Modes
Covers/Inserts
4
Insertion
Front Cover
Type A Setting
Insertion
Back Cover
Type B Setting
Front Cover Setting
Print on Front Cover
Yes No
(1)
5
If both sides of the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. Tab paper
can only be inserted.
Special Modes
Covers/Inserts
Insertion
6
Front Cover
Type A Setting
Insertion
Back Cover
Type B Setting
Cancel
Paper Tray
Settings
Insertion
Settings
Page Layout
Cancel OK
Paper Tray
Bypass
Tray
1-Sided 2-Sided
8 x11 1 / 2
Plain
(A) (B)
(2)
Cancel
Paper Tray
Settings
Insertion
Settings
Page Layout
Touch the [Front Cover] key.
OK
OK
Select front cover settings.
In the example screen, 8-1/2" x 11" (A4) size plain paper in the
bypass tray is selected.
(1) If you wish to copy on the front cover, touch
the [Yes] key.
(3) (4)
(2) If you touched [Yes] in (1), touch the
[1-Sided] key if copying will be 1-sided or
the [2-Sided] key if copying will be 2-sided.
(3) To change the paper tray used for the front
cover, touch the tray select key.
(A) The currently selected paper tray for the cover is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
In the example screen, 8-1/2" x 11" (A4) size plain paper
is loaded in the bypass tray.
To change the paper tray for the cover, touch the tray
selection key. (In the screen example, the "Bypass Tray"
display is the tray selection key.)
The tray selection screen appears when the tray selection
key is touched. Select the paper tray for the cover in the
tray selection screen and touch the [OK] key.
Front Cover
(4) Touch the [OK] key.
If you wish to insert a back cover, touch
OK
the [Back Cover] key.
OK
The screen of step 5 appears. The procedures are the same as
for the front cover. Follow the procedures in step 5.
When following the procedures, substitute "Back Cover" for
"Front Cover".
76
8 x11
8 x11 1 / 2 Plain
1 / 2 Plain
8 x11R
8 x14 1 / 2 Plain
Plain
11x17
OK
1 / 2
Plain