Sharp MX-2300N User Manual page 809

2
Indicator
line
3
Mixed size originals (placing different sizes of originals together)
When using the automatic document feeder, originals of different sizes in the range of combinations shown below can
be scanned together.
When scanning mixed sizes of originals, be sure to touch the [Mixed Size Original] key in the special modes and select
[Same Width] or [Different Width].
The following combinations of original sizes can be used.
When the originals are the same width
Touch the [Mixed Size Original] key in the special modes
and select [Same Width].
Place the originals with the
sides that are the same
length aligned on the left.
11" x 17" (A3)
8-1/2" x 11" (A4)
Allowed combinations of sizes
11" x 17" and 8-1/2" x 11", 8-1/2" x 14" and
8-1/2" x 11"R, 8-1/2" x 14" and 5-1/2" x 8-1/2",
8-1/2" x 13" and 8-1/2" x 11"R, 8-1/2" x 13" and
5-1/2" x 8-1/2", 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A3 and
A4, B4 and B5, A4R and A5)
Adjust the original guides to the size of
the originals.
Place the original.
Make sure the edges of the originals are even.
Insert the originals face up all the way into the document feeder
tray.
Insert a number of originals that does not exceed the indicator
line on the document feeder tray. On the MX-3501N/4501N, a
maximum of 150 sheets can be inserted . A maximum of 100
sheets can be inserted in the automatic document feeder of
other models.
When the originals are different widths
Touch the [Mixed Size Original] key in the special modes
and select [Different Width].
8-1/2" x 14"
(B4)
Allowed combinations of sizes
11" x 17" and 8-1/2" x 14", 11" x 17" and 8-1/2" x 13",
11" x 17" and 5-1/2" x 8-1/2" (A3 and B4, A3 and B5, A4
and B4, A4 and B5, B4 and A4R, B4 and A5, B5 and
A4R, B5 and A5)
Combinations of sizes other than the above cannot be
used for "Different Width".
2-sided scanning is not possible when "Different Width"
is selected. (except when using the MX-3501N/4501N)
34
Align the originals here
in the document feeder
tray.
11" x 17" (A3)