Using The Document Glass For Transmission - Sharp MX-2300N User Manual

USING THE DOCUMENT GLASS FOR
TRANSMISSION
To fax a thick original or other original that cannot be fed through the automatic document feeder, open the automatic
document feeder and place the original on the document glass.
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
• When faxing a multi-page original, scan each page in order starting from the first page.
• When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to
scan the original pages.
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
2
(3)
To Cc
AAA AAA
CCC CCC
EEE EEE
Frequent Use ABCD
Original size
detector
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
(1)
(2)
Condition
1/1
Address Review
BBB BBB
DDD DDD
Sub Address
FFF FFF
OPQRST UVWXYZ
EFGHI JKLMN
Sort Address
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
5-1/2" x 8-1/2"
8-1/2" x 11"
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Enter the destination fax number.
Resend
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
File
(3) Touch the [To] key.
☞
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
If the fax number of the transmitting machine is not stored in the
Address Book, enter the fax number with the numeric keys.
☞
Settings
ENTERING A FAX NUMBER WITH THE NUMERIC KEYS
(page 35)
Global
21
Document glass scale
8-1/2" x 14"
11" x 17"
(page 36)
mark
8-1/2" x 11"R