Reversing Black And White In A Copy (B/W Reverse) - Sharp MX-2300N User Manual

REVERSING BLACK AND WHITE IN A COPY
(B/W Reverse)
This is used to reverse black and white in a copy to create a negative image. This function can only be used for black
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce
toner consumption.
1
Ready to scan for copy.
Full Color
Color Mode
Job Detail
2
Settings
Auto
Exposure
100%
Copy Ratio
Special Modes
Stamp
3
Quick File
(2)
Image Edit
Photo Repeat
4
11x17
Full Bleed
Originals
Original 8 x11 2-Sided Copy
1 / 2
Output
Plain
8 x11 1 / 2
Special Modes
8 x11 1 / 2
1.
8 x11R 1 / 2 File
2.
8 x14 1 / 2
3.
11x17 Quick File
4.
Color
Image Edit
Adjustments
File Proof Copy
Mirror
Multi-Page
Enlargement Image
B/W
Centering
Reverse
(1)
B/W Reverse copy
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Touch the [Special Modes] key.
0
Select Image Edit.
OK
3/4
(1) Touch the
the screens.
(2) Touch the [Image Edit] key.
(1)
Select B/W Reverse.
OK
(1) Touch the [B/W Reverse] key so that it is
highlighted.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the
(2)
special mode screen. Touch the [OK] key to return to the
base screen of the copy mode.
137
keys to switch through