Sharp MX-2300N User Manual page 839

4
Do not point the holes down as used toner will spill out.
5
There are 5 seals. Remove all of the seals.
6
• There are 5 seals. Plug all of the holes.
• Do not discard the waste toner box. Place it in a plastic bag and keep it until your service technician comes to
perform maintenance. Your service technician will collect the waste toner box.
7
Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the
box.
Remove the seals around the holes.
Grasp the edge of each seal and pull it out toward you.
Plug the holes.
Grasp the edge of each black seal and insert it into a hole in the
box to plug the hole.
Install the new waste toner box.
Insert the box from above at a slant. (The direction opposite to
when you removed it.)
64