Sharp MX-2300N User Manual page 346

8
To cancel scanning...
Press the [STOP] key (
For a broadcast transmission, changes to the transaction report print conditions apply to all destinations.
• System Settings (Administrator): Transaction Report Print Select Setting
This is used to set the conditions for printing transaction reports.
The factory default settings for printing are indicated by
Single Sending: Print Out All Report/
Broadcasting:
Receiving:
• System Settings (Administrator): Original Print on Transaction Report
This is used to have part of the transmitted original printed on the transaction report.
) to cancel the operation.
Print Out Error Report Only
Print Out All Report /Print Out Error Report Only/No Printed Report
Print Out All Report/Print Out Error Report Only/
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
pages have been scanned and then press the [Read-End]
key.
A beep will sound to indicate that scanning is finished.
below.
/No Printed Report
No Printed Report
123
). Repeat until all