Using A Search Number To Call Up A; Destination - Sharp MX-2300N User Manual

USING A SEARCH NUMBER TO CALL UP A

DESTINATION

A destination stored in one-touch key in the Address Book can be called up using the
base screen of fax mode or in the Address Book screen.
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
1
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
• The search number is programmed when the destination is stored in a one-touch key.
2
• If you do not know the search number, print the one-touch address list using "Sending Address List" in the system
settings for fax.
☞
Sending Address List
• When entering search numbers such as "001" and "011", "0" can be omitted. For example to enter "001", enter "1"
and touch the
If an incorrect search number is entered...
Press the [CLEAR] key (
Speaker Resend
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
(page 134)
key or the [Next Address] key.
) to clear the number and enter the correct number.
Touch the
File
Enter the 3-digit search number of the
destination with the numeric keys.
When the 3-digit search number is entered, the stored
destination is retrieved.
43
key. This can be done in the
key.