Printing A Password-Protected Fax (Hold Setting For Received Data Print) - Sharp MX-2300N User Manual

PRINTING A PASSWORD-PROTECTED FAX (Hold
Setting For Received Data Print)
You can turn off automatic printing of received faxes (Hold Setting for Received Data Print). When this function is
enabled, received faxes will not be printed automatically; a password entry screen will appear instead.
Password entry screen
To print a received fax, enter the password that is programmed for this function (4 digits) with the numeric keys.
To close the password entry screen without entering a password, touch the [Cancel] key. The password entry screen will
appear again if the mode is changed.
In addition, after the [Cancel] key is touched to close the screen, the
that a received fax is being held.
Touch the blinking
"Hold Setting for Received Data Print" can be enabled for received faxes and also for transaction reports that are printed with
the received faxes.
System Settings for Fax (administrator):
This is used to program a password for printing of received faxes.
key to enter the password and print the fax.
Hold Setting for Received Data Print
Received data is stored.
Enter password via the 10-key.
Cancel
47
key will blink in the base screen as a reminder
(page 176)