Sharp MX-2300N User Manual page 65

Enter the administrator password.
(From 5 to 32 characters)
Password
2
3
This step is not necessary if you are logging in after you pressed the [SYSTEM SETTINGS] key.
System Settings
Total Count
Paper Tray
Settings
Printer Condition
Settings
System Settings
User Control
Device Control
Printer Settings
4
System Settings
List Print
(Administrator)
Storing/Calling
of System Settings
• For detailed explanations of each of the settings, see the following pages of this chapter.
• Items marked (A) above are indicated as "System Settings (Administrator)" in this manual to distinguish them from
the general user system settings.
• If Auto Clear activates, logout will automatically take place.
• To logout...
Press the [LOGOUT] key (
Cancel
(1)
SYSTEM
SETTINGS
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Energy Save Operation Settings
Copy Settings Network Settings
Image Send Document Filing
Settings Settings
(A)
Enable/Disable
Security Settings
Settings
Change Admini-
Product Key
strator Password
(A)
). (Except when entering a fax number.)
Enter the administrator password.
(1) Touch the [Password] key and enter the
OK
administrator password.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
(2) Touch the [OK] key.
(2)
Press the [SYSTEM SETTINGS] key.
Configure the desired system settings.
Exit
Touch the items that you wish to configure and select the
1/3
desired settings.
Exit
2/3
Exit
3/3
63