Sharp MX-2300N User Manual page 328

8
The exposure and resolution can be changed between sets of originals.
Place next original.
Press [Start].
When finished, press [Read-End]
9
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
If the memory becomes full during scanning, a message will appear and the transmission will be canceled.
To cancel the job build function....
Touch the [Job Build] key in the screen of step 4 so that it is not highlighted.
Insert the next set of originals and press
the [COLOR START] key (
[BLACK & WHITE START] key (
or
Press the [START] key pressed in step 7.
Repeat until all originals have been scanned.
Touch the [Read-End] key in the touch
(Pg.No.x)
panel.
Read-End
105
) or the
).