Erasing Peripheral Shadows On The Image (Erase) - Sharp MX-2300N User Manual

ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books.
Scanning a thick book
Shadows appear here.
Erase modes
Edge erase
This erases
shadows that
appear at the edges
of the image when
thick originals or
books are faxed.
1
Ready to send.
Scan
Fax
Mode Switch
8 x11 1 / 2
Image
2
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Speaker Resend
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
Not using the erase
Shadows appear in the
image.
Center erase
This erases shadows
at the bindings of
books or other bound
documents.
Place the original.
Place an original that cannot be inserted in the document
feeder tray face down on the document glass.
If the original can be placed in the document feeder tray, place
it face up.
Touch the [Special Modes] key.
File
69
function
No shadows appear.
Edge + Center erase
This erases shadows at
both the edges and the
binding.
Using the erase
function