Changing The Paper Size - Sharp MX-2300N User Manual

CHANGING THE PAPER SIZE

1
A
2
B
3
4
If "Disabling of Duplex" is enabled in the system settings (administrator), insert letterhead and pre-printed paper with
the print side face up.
5
Pull out the paper tray.
Gently pull the tray out until it stops.
If paper remains in the tray, remove it.
Adjust the guide plates A and B by
squeezing their lock levers and sliding
them to match the vertical and
horizontal dimensions of the paper to be
loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
Fan the paper.
Before loading the paper, fan it well. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
Insert the paper into the tray.
Insert the paper with the print side face up.
Indicator
However, letterhead and pre-printed paper should be inserted
line
with the print side face down.
The paper stack must not be higher than the indicator line (no
more than 500 sheets).
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine.
24