Sharp MX-2300N User Manual page 188

4
To cancel scanning...
Press the [STOP] key (
• When a file is stored using Quick File, the following user name and file name are automatically assigned to the file.
User Name: User Unknown
File Name: Mode_Month-Day-Year_Hour-Minute-Second
(Example: Copy_08012005_134050PM)
Stored to: Quick File Folder
• When user authentication is used, the user name that was used for login is automatically selected.
• Only the file name and location of a file stored in the Quick File Folder can be changed.
To cancel Quick File...
Touch the [Quick File] key in the screen of step 2.
or
).
Select copy settings and then press the
[COLOR START] key (
[BLACK & WHITE START] key (
• When copying begins, the scanned document image is
saved to the hard drive.
The selected copy settings are also saved.
• To prevent accidental saving of the document, "The scanned
data is stored in the quick file folder." appears as a message
for 6 seconds after the [START] key is pressed.
The 6-second message display time can be changed using
"Message Time Setting" in the system settings
(administrator).
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
• If you placed the original on the document glass, scan each
page one page at a time.
When scanning of one page finishes, replace it with the next
page and press the [START] key.
Repeat until all pages have been scanned and then press
the [Read-End] key.
12
) or the
).