Sharp MX-2300N User Manual page 678

Special Modes
Margin Shift
3
Pamphlet Copy
4
If an incorrect number of copies is set...
Press the [CLEAR] key (
5
• To cancel scanning...
Press the [STOP] key (
• To cancel tandem copying...
Touch the [STOP] keys (
OK
Dual Page
Erase
Copy
Job Tandem
Build Copy
(1) (2)
) and then enter the correct number.
or
).
) on both the master machine and the slave machine.
Select tandem copy.
1/4
(1) Touch the [Tandem Copy] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
Set the number of copies with the
numeric keys.
Up to 999 can be set. When the [COLOR START] key
( ) or the [BLACK & WHITE START] key (
pressed, the copies will automatically be divided between the
master and slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
Press the [COLOR START] key (
or the [BLACK & WHITE START] key
( ).
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time. If you are using the sort function or other
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
The following screen appears when the [START] key is pressed.
After the message appears, tandem copying begins.
If tandem copying is not possible, the following screen appears.
To have the master machine make all copies, touch the [OK]
key. To cancel the job, touch the [Cancel] key.
72
Starting tandem operation.
Please wait.
Tandem output is not allowed.
Output all sets using master machine?
(Cancel will delete the job.)
OK Cancel
) is
)