Sharp MX-2300N User Manual page 123

Settings to Disable Transmission
These settings are used to disable the following
transmission operations.
Disable [Resend] on Fax/Image Send Mode
Disable the use of the [Resend] key on the basic
screen of image send mode.
To enable this setting, select the checkbox
touch the [OK] key.
Disable selection from the Address Book
This is used to disable selecting the destination from
the Address Book.
To use this setting, select the checkboxes
desired items from the following and touch the [OK]
key.
• E-mail
• FTP
• Desktop
• Network Folder
• Internet Fax
• Fax
(When the [Select/Cancel All] key is touched, all
settings become
checked condition, all settings become
Disable Direct Entry
This prohibits the direct entry of the address.
To use this setting, select the checkboxes
desired items from the following and touch the [OK]
key.
• E-mail
• Internet Fax
• Fax
(When the [Select/Cancel All] key is touched, all
settings become
checked condition, all settings become
Disable PC-I-Fax Transmission
(When Internet fax expansion kit is installed.)
Disable transmission from PC-I-Fax.
To enable this setting, select the checkbox
touch the [OK] key.
Disable PC-Fax Transmission
(When the facsimile expansion kit is installed.)
Disable transmission from PC-Fax.
To enable this setting, select the checkbox
touch the [OK] key.
. When the key is touched in the
.)
. When the key is touched in the
.)
Document Filing Settings
Disable Stamp for Reprinting
When a stored file is called up and printed, this setting
prohibits the selection of a "Stamp" setting in the
special modes. If a stamp setting is already selected,
and
it will not be possible to change the stamp setting.
This function can be used to prevent inconsistencies
in the printed information, such as that of the original
date in the file and the date the file is called up and
printed.
To enable this setting, select the checkbox
of the
touch the [OK] key.
Batch Print Settings
When printing files by batch printing, this setting is
used to prohibit the selection of the [All Users] key
and the [User Unknown] key in the user selection
screen.
Select the checkboxes
you wish to prohibit and touch the [OK] key.
• Selection of [All Users] is not allowed.
• Selection of [User Unknown] is not allowed.
of the
and
and
121
and
of the items below that