Sharp MX-2300N User Manual page 532

8
To cancel scanning...
To cancel scanning, press the [STOP] key (
• If other documents have already been stored in the memory box, the document is added to the previously stored
documents.
• The factory default setting for the number of polling times is "Once" (after the document is transmitted to the receiving
machine, it is automatically cleared).
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
• If you are scanning the original on the document glass, scan
each page one page at a time.
When scanning finishes, place the next original and press
the [BLACK & WHITE START] key (
pages have been scanned and then press the [Read-End]
key.
) during scanning.
116
). Repeat until all