Sharp MX-2300N User Manual page 537

RELAY BROADCAST TRANSMISSION
USING F-CODES
When your machine receives an F-code relay request transmission, the fax is received to an F-code memory box (relay
broadcast) in your machine.
Your machine then relays the fax to each of the end receiving machines programmed in the memory box. Transmission
to the end receiving machines takes place automatically.
Machine requesting
relay broadcast
Transmission specifying an F-code
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
• Prior to the operation, inform the requesting party of the sub-address and passcode of the memory box (relay broadcast) in
your machine.
• The end receiving machines are programmed in the F-code relay broadcast memory box when the box is created in your
machine.
• The end receiving machines do not need to support F-code communication.
• The other machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to
your machine (the relay machine). Your machine (the relay machine) bears the cost of sending the fax to each of the end
receiving machines.
Your machine
F-code Memory Box
(relay broadcast)
Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
End receiving machines are
programmed in this box
121
The fax is transmitted to each of the
end receiving machines
programmed in the F-code relay
broadcast memory box.
Transmission