Threshold <Refl; Threshold <Trans - Toshiba B-EX Series Key Operation Specification

8.5.8.2 RBN ADJ.<BK>
8.5.8.2.1 TYPE1
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
All fine adjustment values are applicable to every print speed.
8.5.8.2.2 TYPE2
Max. Min. value
value
10 -15
The fine adjustment value is not effective for the reverse rotation.
All fine adjustment values are applicable to every print speed.
8.5.9 THRESHOLD <REFL.>
Max. Min. value
value
4.0 0.0
For B-EX4T3-H, this parameter is applied to THRESHOLD1 through THRESHOLD5.
Note: If "0.0 V" is set, the value "0.0 V" is returned to the initial value (1.0 V) when the power is turned
OFF then ON.
8.5.10 THRESHOLD <TRANS.>
Max. Min. value
value
4.0 0.0
For B-EX4T3-H, this parameter is applied to THRESHOLD1 through THRESHOLD5.
Note: If "0.0 V" is set, the value "0.0 V" is returned to the initial value (1.4 V) when the power is turned
OFF then ON.
Supplementary explanation
• When the [RESTART] and [FEED] keys are pressed simultaneously, the screen returns to the system
mode menu.
• When the [RESTART] or [FEED] key is held down for 0.5 seconds or more while a fine adjustment
value is being set, the printer enters the repeat mode, in which the key is entered repeatedly.
• A changed fine adjustment value is stored in memory by pressing the [PAUSE] key.
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
0.1 Decimal
Step Display
0.1 Decimal
108
Sign Integer Decimal
digit
Exist 2
Sign Integer Decimal
digit
Exist 2
Sign Integer Decimal
digit
None 1
Sign Integer Decimal
digit
None 1
0-padding
place measure
0 None
0-padding
place measure
0 None
0-padding
place measure
1 None
0-padding
place measure
1 None
Unit of
Step
Unit of
Step
Unit of
V
Unit of
V