Toshiba B-EX Series Key Operation Specification page 152

8.12.3.1 ADJ RETRY POSITION
If writing data on a tag failed, the printer feeds the RFID tag forward or backward for specified length, in
order to retry data writing. When "0" is set for this parameter, this function and retrying are not
performed.
Only the value of -3 mm or less or +3 mm or more is effective.
Max. Min. value
value
99 -99
8.12.3.2 ISSUE RETRY LABLES
When issuing an RFID tag failed, the printer prints the error (Void) pattern, and retries to issue the tag
for up to specified number of times. If the printer does not succeed even after having retried for the
maximum number of times, the printer stops, resulting in an error.
Max. Min. value
value
255 0
8.12.3.3 READ RETRY
The number of times tag read is retried and the timeout for read retry are set.
The printer retries to read the data in an RFID tag for up to specified number of times. If the timeout
period expired before the maximum number of retries have been done, the printer stops the retries at
the time. Whenever the printer writes data onto an RFID tag, the tag is read first. The maximum number
of retries set by this parameter becomes also effective in this pre-read.
Max. Min. value
value
255 0
The timeout for RFID tag read retry is set.
If the printer has retried for the maximum number of times within the RFID read retry timeout, the printer
stops the retries at the time. Whenever the printer writes data onto an RFID tag, the tag is read first. The
read retry timeout set by this parameter becomes also effective in this pre-read.
Max. Min. value
value
9.9 0.0
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
0.1 Decimal
147
Sign Integer Decimal
digit
None 2
Sign Integer Decimal
digit
None 3
Sign Integer Decimal
digit
None 3
Sign Integer Decimal
digit
None 1
0-padding
place measure
0 None
0-padding
place measure
0 None
0-padding
place measure
0 None
0-padding
place measure
1 None Second
Unit of
mm
Unit of
Labels
Unit of
Times
Unit of