Toshiba B-EX Series Key Operation Specification page 91

8.4.2.4 MANUAL
Max. Min. value
value
0xFF 0x00
・ CODE1
・ CODE2
・ CODE3
8.4.2.5 PEEL OFF STATUS
・ OFF Disabled
・ ON Enabled
8.4.2.6 USB I/F STATUS
・ OFF Disables sending a response via USB.
・ ON Enables sending a response via USB.
Note:
 In the case of B-EX4T1-TS25-R V2.0C or later:
Whether a status response is returned via the USB Function Interface or not is selected.
 In other cases than above:
Regardless of the setting of this parameter, the status indicating the end of issue is automatically
returned. The following are the commands related to the status.
[WS, WB, or WN command]
● In the case the USB and other interface cables are connected to the printer:
Whether a status is returned or not depends on the setting of this parameter.
Example) When this parameter is set to ON and a WS or WB command is sent to the printer
via LAN, the printer returns the status via both LAN and USB.
● In the case only the USB cable is connected to the printer:
A status will be returned regardless of the setting of this parameter.
[Status-related commands other than WS and WB]
Whether a status is returned or not depends on the setting of this parameter.
8.4.2.7 FEED KEY
・ FEED Feeds one label.
・ PRINT Prints data in the image buffer.
8.4.2.8 KANJI CODE
・ TYPE1 Windows code
・ TYPE2 Original code
Step Display
1 Hex.
Sign Integer Decimal
digit
None 2
86
0-padding
place measure
0 None
Unit of
h