Toshiba B-EX Series Key Operation Specification page 179

Note:
In the case the printer information, which was obtained with the parameter setting menu of the B-EX
Setting Tool, is updated, a reboot of the printer will be prompted when the printer is restored to the
online mode. As the print log is cleared when the printer is rebooted, the parameter settings should not
be updated before saving the print log. For details, refer to the B-EX Setting Tool Operation Manual.
<CASE 3> B-EX4T1 Japan model with the firmware V1.0I only
YYMMDDhhmmssPR,AAAAAAAA,BBBBBBBB,CCCC,DDDD,EEEE,FF,GGGGGG,HHHHHHHH,II,JJ,K
KK...KKK,LLL...LLL,MMMMMMMM,NNNN,OOOO,PPPP
Log
YY Year (00 to 99)
MM Month (01 to 12)
DD Day (01 to 31)
hh Hour (00 to 24)
mm Minute (00 to 59)
ss Second (00 to 59)
PR Define character (fixed to "PR")
AAAAAAAA Ambient temperature
BBBBBBBB Print tone fine adjustment value
CCCC Print tone fine adjustment value (thermal transfer)
DDDD Print tone fine adjustment value (direct thermal)
EEEE Power voltage
FF Head voltage rank
GGGGGGGG Print head temperature
HHHHHHHH Print ratio
II Supply type (thermal transfer)
JJ Supply type (direct thermal)
KKK ... KKK Energizing time (4-digit data x 9, which are comma-separated)
LLL ... LLL Contribution ratio (2-digit data x 16, which are comma-separated)
MMMMMMMM Chopping section
NNNN Chopping negation time
OOOO Chopping cycle
PPPP Power supply pattern
<CASE 4>
ZZZ ...ZZZ (Those not applicable to the above-mentioned CASES 1 to 3)
Log
ZZZ ... ZZZ Print log output from the OS. The contents vary case by case.
Description
Description
174