Toshiba B-EX Series Key Operation Specification page 23

(9) While the result of the fine adjusted threshold setting is shown, pressing the [LEFT] key returns the
screen to the threshold fine adjustment screen and pressing the [RIGHT] key shows the details of the
result.
(10) During threshold setting, the media is fed at the same speed with that for the previous issue.
(11) Whether the threshold setting succeeded or not can be checked with the following methods.
 Media feeding with the [FEED] key
1. While the judgment result is displayed, press the [FEED] key to terminate the threshold setting.
→ The printer is placed in the pause state.
2. Press the [RESTART] key to clear the pause state.
→ The printer is placed in the online state.
3. Hold down the [MODE] key.
→ The printer enters the user system mode.
4. Select "<2>PARAMETER SET", "Software Set", then "THRESHOLD SELECT" with the [UP], [DOWN]
and [ENTER] keys.
5. Select the applicable media sensor type ("REFLECT" or "TRANS.") and press the [ENTER] key.
→ The selected sensor type menu is shown.
6. Select "MANUAL SET", press the [ENTER] key and then the [MODE] key.
→ The user system mode menu is displayed.
7. Select "<1> RESET" and press the [ENTER] key.
→ After the printer is reset, it is placed in the online mode.
8. Press the [FEED] key to feed the media.
→ If a media jam occurs or the media does not stop at the print start position, retry the threshold
setting.
18