Toshiba B-EX Series Key Operation Specification page 96

8.4.2.18.1 TRANSFER
<B-EX4T1-G/T-QM/CN C1.4 or before>
・ Semi resin1
・ Semi resin2
・ Resin1
・ Resin2
・ Resin3
・ Reserve2 to Reserve6
<B-EX4T1-G/T-QM/CN C1.5 or later>
・ Semi resin1
・ Semi resin2
・ Resin1
・ Resin2
・ Resin3
・ SX compatible
・ Reserve1 to Reserve4
(*1) SX compatible" is a setting for securing the print quality equivalent to that of the B-SX series, but
it is not effective at the print speed of 10 ips or faster. If 10 ips or faster print speed is specified,
the printer operation is not guaranteed. For details, refer to the Supply Specification for the
B-EX4T1 series.
<B-EX4T2-G/T C1.0C or before>
・ Wax1
・ Wax2
・ Semi resin1
・ Semi resin2
・ Resin1
・ Reserve1 to Reserve5
<B-EX4T2-G/T C1.0D>
・ Wax1
・ Wax2
・ Semi resin1
・ Semi resin2
・ Resin1
・ Wax3
・ Semi resin3
・ Reserve1 to Reserve3
<B-EX4T2-G/T C1.0E to C1.2, B-EX4D2-G>
・ Wax1
・ Wax2
・ Semi resin1
・ Semi resin2
・ Resin1
・ Wax3
・ Semi resin3
・ Resin2
・ Reserve1 to Reserve2
Note: This parameter is not used for B-EX4D2-G.
Semi-resin 1
Semi-resin 2
Resin 1
Resin 2
Resin 3 ("Resin3" is not usable for the B-EX4T1-T model.)
Reserved
Semi-resin 1
Semi-resin 2
Resin 1
Resin 2
Resin 3 ("Resin3" is not usable for the B-EX4T1-T model.)
SX compatible (*1)
Reserved
Wax 1
Wax 2
Semi-resin 1
Semi-resin 2
Resin 1
Reserved
Wax 1
Wax 2
Semi-resin 1
Semi-resin 2
Resin 1
Wax 3
Semi resin 3
Reserved
Wax 1
Wax 2
Semi-resin 1
Semi-resin 2
Resin 1
Wax 3
Semi resin 3
Resin 2
Reserved
91