Toshiba B-EX Series Key Operation Specification page 79

Internal serial I/F check
EX.232C NG
External serial I/F check
(Applicable model: B-EX4T1-TS25-R V2.0 or later, B-EX4T1-G/T C1.1A or later, and B-EX4T2-G/T C1.1 or
later)
C NG (0111)
RFID module check (U2/U4 module series only)
RFID OK #00RV972 (EU0) R01
RFID OK #10A:A0 0 (EU0) R00
Module versions and LCD message
B-EX700-RFID-U2-US-R
Version LCD message
R02 US, KR2, AU, TW (Use of AU and TW is prohibited.)
B-EX700-RFID-U2-EU-R
Version LCD message
R11 EU0, IN0 (Use of IN0 is prohibited.)
OK: Normal data
NG: Abnormal data or the loop-back jig is not connected
Internal serial interface
Bit configuration (x3x2x1x0)
x0: Fixed to 1
x1: Fixed to 1
x2: Fixed to 1
x3: Presence of the optional board (0: RS-232C PC board not installed)
OK: Normal data
NG: Abnormal data or loop-back jig is not connected.
External serial interface
Module revision (U2 series only)
Destination
RFID module version
OK: Normal state
NG: Erroneous state
RFID module
Module revision (U4 series only)
Destination
RFID module version
OK: Normal state
NG: Erroneous state
RFID module
(1: RS-232C PC board installed)
EU0: Europe
US:
AU:
KR2: Korea
TW: Taiwan (Prohibited)
CN2: China
IN0: India (Prohibited)
74
JP: Japan
EU0: Europe
US: North America
CN2: China
AU: Australia
KR2: Korea
TW: Taiwan
IN0: India
North America (Prohibited)
Australia (Prohibited)