Toshiba B-EX Series Key Operation Specification page 72

CALIB. MODE (*2)
CALIB. AGC (*2)
CALIB. POSITION (*2)
ANTENNA POSITION (*2)
MULTI WRITE
HEADUP ACTION (*3)
WRITE OK TAGS
VOID PRINT TAGS
*1. Applicable model:
B-EX4T1-G/T-QM/CN C1.0I or later, B-EX4T2-G/T-QM/CN C1.0F or later, B-EX4T1-TS25-R R2.1 or later
*2. Applicable model: B-EX4T1-G/T-QM/CN C1.4 or later
*3. Applicable model: B-EX4T1-TS25-R V2.2 or later
<< RTC >>
Item
BATTERY CHECK
RENEWAL
RFID calibration mode
Optimum AGC value obtained
through RFID calibration
Distance to the optimum
read/write position obtained
through RFID calibration
Position of the RF antenna
and the wave director
Hibiki tag multi-word write
Head up action during reverse
feeding
Count of RFID success label
write issue
Count of RFID failure label
write issue
Description
Battery check
Time update timing
67
ON (ACCESS When PASS is selected,
the following settings are
PASSWORD)
subsequently displayed:
Password setting to
protect error tag
detection
ON:
OFF:
Automatic unlock
function setting
ON:
OFF:
OFF Disabled
ON Enabled
0 to 15
-999.9 mm to
+999.9 mm
FRONT Front
CENTER Center
REAR Rear
ON Enabled
OFF Disabled
MODE1 The print head is raised
in accordance with the
ribbon saving and head
up settings.
MODE2 The print head is raised
during
feeding.
0 to 9999999
0 to 9999999
Value to be printed
ON
OFF
BATCH
PAGE
BATCH UPDATE Every 1 minute
Enabled
Disabled
Enabled
Disabled
every reverse
Enabled
Disabled
Every batch
Every page